Views: 0 Author: Site Editor Publish Time: 2022-02-07 Origin: Site
Good quality sliding rollers, tightly installed bearings, soft and no noise when sliding, even some sliding rollers can also play a role in adjusting the height, and ultimately make the door and the track more closely connected. Next, let us learn about the sliding roller replacement and more details. Here are some answers.
Here is the content list:
How to replace a broken sliding roller?
More details.
First, one hand is perpendicular to the ground to lift one end of the sliding door and window, and one hand passes through the lower part of the sliding door and window sliding roller to support the door and window sliding roller. Then lift one end of the sliding door and window from the track and put it down. In the same way, lift the other end of the sliding door and window out of the track. Then hold both ends of the sliding doors and windows with both hands and lift them. In this process, pay attention to safety.
For disassembling the sliding rollers of sliding doors and windows, first, place the doors and windows flat on the ground, and then observe the sliding doors and windows. Usually, there is a wool strip on one end of the door and window frame. Pull the wool strip directly attached to the door frame to the second screw hole. The bottom screw hole is the screw hole for the door and window sliding roller fixing screw, and the upper one is the screw hole for fixing the aluminum alloy frame. Insert a 6mm hexagon wrench from the round hole. At this time, press the door and window sliding roller of the sliding door and window with one hand, use a tool to remove the screw and then pull out the door and window sliding roller, which removes the door and window sliding roller. Push the upper sliding roller into the gap between the screw cap and the inner wall of the door and window frame. To keep the upper sliding roller at a certain distance, a piece of cardboard can be sandwiched between the upper edge of the door and window frame and the plane of the upper sliding roller. Then tighten the screws. After the upper sliding roller is installed, remove the cardboard. Turn the sliding door and window over and stand it up, insert the screw through the round hole at the bottom, and press the lower sliding roller with your hand, so that the screw hole can be perpendicular to the screw, and the screw can be easily screwed in. After the screws are screwed in and adjusted, turn them five more turns. At this point, the replacement and installation of the upper and lower sliding rollers of the sliding door and window are completed.
The sliding roller is made of excellent hardware materials, which is resistant to high temperature and has a long service life. In the production process of sliding rollers, to make the products more durable, we use a variety of precision processing equipment for production. After production, sliding roller products are widely used, often used in hotel doors and windows, household doors and windows, office doors and windows, etc.
Our official website is https://www.3hhardware.com/. If you are interested in our sliding roller products, please feel free to contact us. We believe that our cost-effective products will satisfy you.
