How to use window handles?

We not only need to know what a window handle is? Also, know what types of window handles are there? More importantly, how to use window handles? In this way, when our window handle is damaged, we can properly repair it.

Here is the content:

What tools are needed to install window handles?

What is the installation method of the window handle?

What should I pay attention to when installing window handles?

What tools are needed to install window handles?

The tools needed to install the window handle are a pistol drill and a screwdriver. We should note that the size of the drill bit of the pistol drill is installed according to the size of the screw connecting the aluminum alloy handle. At the same time, we also need to prepare related connection materials, such as glue, tape, and so on.

What is the installation method of the window handle?

First, drill a hole in the narrow edge of the window, at the height you want to place the window handle. This hole will be used for the latch that keeps the window closed. Position and hold the latch on the hole in the window. When you line up, you should be able to see the hole through the latch plate. Use a pencil to surround the shape of the board on the window. Remove the latch plate, and then use a hammer and chisel to remove the wood in the marked area. Make sure it is as deep as the thickness of the latch plate. Once completed, the panel should be flush with the edge of the window. Use a drill bit to drill the hole, and the window will place the window handle. Go all the way to the other side of the window. Reposition the latch plate and mark the two screw holes with a pencil. Drill a smart hole and insert the latch, then screw in the latch plate. The window handle has two halves, usually connected by two long screws. Insert the window handles into both sides of the window, making sure to line up the screw holes and the center locking mechanism latches. These latches should fit the inner window handles. Finally, install the window panel on the window frame. Lock the window to the window and lock it. Use a pencil to trace the striker board and chisel out the wood from the window frame. Use a drill to make a hole in the middle where the latch enters. Screw-in the striker, then open and close the window to check that everything meets the requirements.

What should I pay attention to when installing window handles?

When installing the window handle, pay attention to the installation direction of the window handle, and do not install the window handle upside down. At the same time, it is also important to install the window handle and the window firmly to prevent the window handle from falling when the window is opened and closed.

The installation of window handles is very important. We need to master the basic installation methods of window handles so that when our window handles have problems, we can deal with them in time. In addition, if you have any questions, you can consult us. Our website is https://www.3hhardware.com